Shooting fireworks on New Year's Eve

Sun, 02 Jan 2011 03:55:00 +0000

There are many blog posts on the subject of how to best set up your camera to shoot fireworks but I was so surprised at just how well it worked out for me that I thought I’d add mine to the pile. Also I wanted to make sure I remembered what I did right and wrong here for next time I try. You’re going to need three things really:

A camera that is up to the job. Perhaps surprisingly you don’t need a full SLR for this, but you do need something that will let you manually adjust the aperture, ISO and exposure times. Shooting in RAW is vastly preferably. I was using a Canon Powershot S90.
A basic tripod. Exposure times will need to be long so you won’t be able to manually hold it steady and you’re shooting upwards so not much other than a tripod will do the job.
Lots of luck. How much really depends on the fireworks display. The longer it is the more time you’ll have to refine your timing and aim. In my case our display was at home one with just 4 fireworks going off, ridiculously I managed to get the setup pretty much right first time.

The basic setup is straightforward. You want a small aperture, apparently somewhere in the range of f/8 to f/16 is golden, my camera limits at f/8 though so that is what I used. You want a fairly low ISO value too, I shot at 100. In an ideal world you’ll want a camera where you can manually hold the shutter open for however long it takes the firework to fire off. I didn’t have that though so instead I just manually set an exposure of 10 seconds which I figured was a long enough to capture a full rocket. Then set up on the tripod, point in the direction you think the firework will go and hope. Remember that fireworks go quite far and your camera will probably capture a decent area of the sky so chances are you’ll get it in frame, whether it is way off to one side is pretty much luck the first time though.

fireworks on Oxymoronical

Shooting fireworks on New Year's Eve